This post is a combination of a review of the MiniVNA Tiny analyzer and the results of using it to test another set of 6 Meter, 3 Element beams I built. I recently added the new MiniVNA Tiny to my lineup of tools here in the KK4ICE shack and workshop. I must say that I […]
Tag: beams
Sweep Test of Homebrewed 6 Meter, 3 Element beams
I used the IFR 1600 and the return loss bridge to run a sweep of the 6 Meter beams I recently built, and here are the results. On a 10 MHz wide sweep, the peak resonant frequency shows up at 51.2739 MHz. At that frequency the analyzer is seeing -83.7 dBm coming back through the […]